Skip to content

SOP · HTM · Motors · Sensors

HTM drive & navigation

Differential drive, odometry and localisation on a horizontal tote mover.

Purpose

Understand how the HTM moves and knows where it is.

Prerequisites

  • Safe service state

Safety considerations

  • Follow your site's lockout / isolation and robot-zone entry rules before approaching equipment.
  • Only trained, authorized personnel perform service actions. This page is concept training.

Normal behavior

Straight travel, accurate stops, consistent localisation.

Conceptual operation

  • Controller splits motion into left/right wheel commands → drives → motors → wheels; encoders + navigation sensors update position.

Inspection points

  • Wheels
  • Sensor windows

Diagnostics

  • Per-wheel faults
  • Localisation confidence

Common symptoms

  • Drift
  • Missed stop positions

Recovery decision tree

  1. 1. Is drift consistent to one side?

    YES → Check that side's wheel/drive.

    NO → Check localisation references.

Authorized procedure

INTERNAL / AUTHORIZED ONLY

Calibration procedures — available only in the model-specific, authorized SOP for your site. Not published on this website.

Verification

  • Accurate stops on repeated runs

Escalation

Maintenance lead.