Skip to content

Conveyor & PPS flow

Follow the tote
to the station.

How one tote moves from storage, by bot, onto a conveyor, to a Pick-Put Station and back — and the messages and acknowledgements that keep every step in sync.

PUBLIC CONCEPTSafe architectural / educational information.

High level

One tote, ten steps.

Press play, or step through. Each step shows what moves and which message makes it happen.

Advanced

Who says what.

Twenty messages between Pick, the bot, the orchestrator, the integration layer and the conveyor. Green ticks are acknowledgements — nothing advances without them.

Acknowledgements

Who confirms what — and what it unlocks.

  • Bot → OrchestratorAction status: running, then finishedThe task only advances on 'finished'.
  • Conveyor → Orchestrator (via integration)Safe to drop: available, then allowSafe to drop the tote on the conveyor.
  • Conveyor → Orchestrator (via integration)Container reachedThe tote is at the station's pick position.
  • Orchestrator → PickTransport completeThe tote is at the station; the operator can start.
  • Pick → OrchestratorTransport job completeThe operator has finished; the tote can be released.

Relay pick

Where VTM hands over to HTM.

In a relay-pick system there is no conveyor between storage and the station: two robot types meet at a relay.

  1. 01

    Order created

    Pick requests totes. The orchestrator creates a tote task for each and hands them to the movement planner.

  2. 02

    VTM to the relay

    If the tote is in storage, a Vertical Tote Mover (VTM) is assigned. It climbs the rack, takes the tote and drops it at a relay location.

  3. 03

    Decision at the relay

    If a station needs the tote, a Horizontal Tote Mover (HTM) is assigned. If not, a VTM takes it back to storage.

  4. 04

    HTM picks up

    The HTM moves to the relay, sets its fork height, takes the tote, lowers the fork and heads for the station.

  5. 05

    Station queue

    If the station is busy, the HTM waits in the entry queue. When it is free, it enters and the station takes control.

  6. 06

    Operator picks

    The operator picks and presses the put-to-light button. The station releases control and the HTM moves to the exit queue.

  7. 07

    Back to a relay

    The orchestrator picks the relay nearest to the tote's final storage location; the HTM unloads there, then parks if idle.

  8. 08

    VTM back to storage

    A VTM loads the tote from the relay, carries it to its storage location and unloads it.

Go deeper: inside the VTM · inside the HTM · HTM and VTM errors

Key terms

The names you'll see in the flow.

Orchestrator
The fleet software that creates and tracks tote, bot and conveyor tasks (GreyMatter).
Integration layer
The bridge that translates messages between the platform, conveyors and customer systems.
PPS
Pick-Put Station. Where the operator picks from or puts into a tote.
PPTL
Pick/Put-To-Light. The buttons and lights the operator presses to confirm.
TTP
Tote-to-person. Bots carry individual totes to the station.
VDA 5050
An open standard for sending orders to mobile robots and reading their state, usually over MQTT.

Conceptual flow. Message names are simplified; exact topics, endpoints and timings differ per site.