HTM Academy
Inside the
Horizontal Tote Mover.
Explore an HTM — drive system, navigation, tote transfer and robot control — then follow a real task: move a tote from the conveyor to a relay.
LOADING 3D MODEL…
XRAY · CONCEPTUAL LAYOUT
01 · Explore
From the outside in.
Switch views to strip away the shell, separate assemblies, or see only the electrical, network, software or sensor systems. Component placement is illustrative.
- Network / data
- Software / control
- Electrical / motion
- Sensor feedback / healthy
- Fault / safety
Components
Component
Drive motors (left / right)
- What it is
- Two motors — one per wheel — that move and steer the HTM.
- What it does
- Move forward, reverse and turn.
- Input
- Current from drives
- Output
- Wheel torque
- Communicates with
- DrivesEncodersController
02 · Task
Move a tote: conveyor → relay
A task is assigned. The robot receives it, accepts the route, drives, keeps updating its position, aligns at the relay, transfers the tote, sees it leave with its presence sensors and reports the result.
COMMAND → DECISION → COMMUNICATION → CONTROL → ELECTRICAL ENERGY → MOTION → SENSOR FEEDBACK → STATE UPDATE
Move tote: conveyor → relay
- Task assignmentSOFTWARE
- Robot receives taskNETWORK
- Route acceptedSOFTWARE
- HTM travelsELECTRICAL
- Position feedbackSENSOR
- Reaches transfer pointSOFTWARE
- Alignment confirmedSENSOR
- Transfer mechanismELECTRICAL
↑ FEEDBACK RETURNS
Presence sensorSENSOR- Transfer completesSOFTWARE
- Task state updatesNETWORK
03 · Manual-control lab
What does “Forward” actually mean?
TRAINING SIMULATION — actual controls vary by robot model, software release and site safety configuration. No real credentials, addresses or production interfaces are represented.
- POSITION
- 15%
- DRIVE
- STOPPED
- TOTE
- ON DECK
- SAFETY
- OK
Press a control to slow time down and see each step.
04 · SOPs
Go from understanding to procedure.
- HTM drive & navigationDifferential drive, odometry and localisation on a horizontal tote mover.
- HTM tote transferAlignment, transfer mechanism and presence sensing during a handoff.
- Sensor mismatchWhen what the system believes differs from physical reality.
- E-stop & safety stateWhy a robot with a valid command still won't move when the safety chain is open.
- Battery & chargingPower state, charging behaviour and how low power affects task acceptance.
- Industrial WLAN client diagnosticsRead association, BSSID, channel and RSSI to judge wireless health on a moving robot.