Purpose
Understand what the WLAN client reports and how to interpret it.
Prerequisites
- Know the exact device model and firmware version
- The vendor's model-specific manual
Safety considerations
- Follow your site's lockout / isolation and robot-zone entry rules before approaching equipment.
- Only trained, authorized personnel perform service actions. This page is concept training.
Normal behavior
The client is associated to an expected SSID, signal is comfortably above the site's threshold, and roaming events are infrequent and fast.
Conceptual operation
- The client associates to one AP (BSSID) at a time.
- It measures signal (RSSI) and decides when to roam according to its supported/configured behaviour.
- It bridges wireless traffic to the robot's onboard Ethernet.
Inspection points
- Status LEDs (meaning per model manual)
- Antenna and cable condition
- Mounting orientation
Diagnostics
- Associated SSID / BSSID
- Channel
- RSSI over the route
- Roaming / event log
- Ethernet link state
Common symptoms
- Drops in specific aisles
- Long gaps during roaming
- Associated but no traffic
Recovery decision tree
1. Is the client associated?
YES → Check RSSI and channel.
NO → Check SSID/security configuration per the authorized SOP.
2. Is RSSI healthy along the route?
YES → Check Ethernet link and upstream reachability.
NO → Follow the RSSI SOP; review AP coverage with the network team.
Authorized procedure
INTERNAL / AUTHORIZED ONLY
Device login, configuration screens, security keys and site SSID settings — available only in the model-specific, authorized SOP for your site. Not published on this website.
Verification
- Stable association during a full route
- No unexplained gaps in robot state
Escalation
Network team, with location, time, BSSID and RSSI readings.