Skip to content

SOP · VTM · Motors · Sensors

VTM lift system

How the lift axis moves the carriage between storage levels and confirms position.

Purpose

Understand normal lift behaviour and how to reason about lift faults.

Prerequisites

  • Robot in a safe, authorized service state

Safety considerations

  • Follow your site's lockout / isolation and robot-zone entry rules before approaching equipment.
  • Only trained, authorized personnel perform service actions. This page is concept training.

Normal behavior

Smooth travel, position reached and confirmed by encoder and position sensor.

Conceptual operation

  • Controller → driver → lift motor → transmission → carriage.
  • Encoder and position sensor confirm the level.

Inspection points

  • Visual condition of mast and transmission
  • Unusual noise

Diagnostics

  • Axis state and fault codes
  • Encoder vs position sensor agreement

Common symptoms

  • Stops between levels
  • Position mismatch fault

Recovery decision tree

  1. 1. Do encoder and position sensor agree?

    YES → Check drive/motor faults.

    NO → Follow sensor mismatch SOP.

Authorized procedure

INTERNAL / AUTHORIZED ONLY

Homing, recovery and parameter procedures — available only in the model-specific, authorized SOP for your site. Not published on this website.

Verification

  • Repeated moves reach and confirm target levels

Escalation

Maintenance lead / vendor.